Kitchen Installers UK

Hob and oven installation · Staffordshire

Hob and oven installation in Stoke-on-Trent

Our hob and oven installation service covers Stoke-on-Trent and nearby places such as Newcastle-under-Lyme and Longton, with a free survey visit and an itemised written quote as the first step.

Guide price£120 to £800
Postcodes includeST4
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Who usually needs hob and oven installation in Stoke-on-Trent?

Landlords in Staffordshire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.

A new kitchen layout in Stoke-on-Trent sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. We work throughout Stoke-on-Trent (ST4) and across the wider Staffordshire area.

What we cover for hob and oven installation in Stoke-on-Trent

Your written quote lists everything included. For hob and oven installation, that normally means:

  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator

Hob and oven installation prices in Stoke-on-Trent

As a starting point for Stoke-on-Trent, these ranges include VAT at 20% and allow for typical labour costs in the West Midlands. Costs in the West Midlands sit close to the national guide.

Hob and oven installation prices in Stoke-on-Trent
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£120–£300
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£120–£250
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£150–£400
New gas pipe run to a new hob positionPipework, testing and making good£250–£800

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

House types around Stoke-on-Trent and what they mean for a kitchen

The housing mix across Staffordshire includes Victorian terraces, 1930s semis, post-war estate houses and moorland stone cottages, so no two kitchen fits are quite alike. Terraces in Stoke-on-Trent often have a small kitchen in the rear offshoot, while 1930s semis and estate houses tend to have a compact kitchen beside the dining room.

Terraced streets with limited parking and narrow moorland lanes in the north of the county can complicate deliveries, so vehicle size and timing are planned ahead. Water across much of Staffordshire is moderately hard to hard, so limescale on taps and boiling water taps is worth planning for.

Regulations for kitchen work in Stoke-on-Trent

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within the Staffordshire part of the Peak District National Park, listed buildings and conservation areas may need consent for new vents or alterations to historic features.

Before you book hob and oven installation in Stoke-on-Trent

  • If your Stoke-on-Trent home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • Before buying an induction hob for your Stoke-on-Trent home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.

Questions about hob and oven installation in Stoke-on-Trent

How much does hob and oven installation cost in Stoke-on-Trent?

Guide prices in Stoke-on-Trent are about £120 to £300 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Stoke-on-Trent as well?

Yes. As well as Stoke-on-Trent itself, we cover the rest of Staffordshire and nearby towns such as Newcastle-under-Lyme and Longton. The process is the same wherever the kitchen is.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Hob and oven installation in neighbouring towns

Neighbouring towns where we offer hob and oven installation:

Planning more than one job in Stoke-on-Trent?

Free survey visit

Book a free survey visit in Stoke-on-Trent

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price