Hob and oven installation in Islington

Why do people in Islington choose hob and oven installation?

A new kitchen layout in Islington sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

If your Islington kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. Islington sits about 3 miles north-east of Westminster, and our Greater London coverage takes in everything in between.

What is included in the work?

After the survey visit we write the scope down. For hob and oven installation in Islington it usually covers:

Old hob or oven disconnected safely and taken away for recycling
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Built-in single and double ovens fixed into housings with their ventilation gaps
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Induction and ceramic hobs wired to a suitable cooker circuit and tested

What does hob and oven installation cost in Islington?

As a starting point for Islington, these ranges include VAT at 20% and allow for typical labour costs in London. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What does hob and oven installation cost in Islington?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Islington

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Islington

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater London can be cut correctly by the fabricator.
If your Islington home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Before buying an induction hob for your Islington home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Islington

How much does hob and oven installation cost in Islington?

Guide prices in Islington are about £160 to £390 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Islington as well?

Yes. As well as Islington itself, we cover the rest of Greater London and nearby towns such as Highbury and Holloway. The process is the same wherever the kitchen is.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Nearby places we cover

We also carry out hob and oven installation in these towns near Islington: