Kitchen Installers UK

Hob and oven installation · Greater London

Hob and oven installation in Highbury

Hob and oven installation in Highbury starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

Guide price£160 to £1,000
Postcodes includeN5
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

When does hob and oven installation make sense in Highbury?

Some people in Highbury buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.

A new kitchen layout in Highbury sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. Kitchens in every part of Highbury are covered, and the survey visit is free wherever you are in Greater London.

What we cover for hob and oven installation in Highbury

Here is what usually goes into hob and oven installation, adjusted to your Highbury kitchen after we have measured it:

  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer

What does hob and oven installation cost in Highbury?

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What does hob and oven installation cost in Highbury?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£200–£520
New gas pipe run to a new hob positionPipework, testing and making good£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for hob and oven installation in Highbury?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

  • If your Highbury home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • If you are moving the hob in your Highbury kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater London can be cut correctly by the fabricator.
  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Highbury

How much does hob and oven installation cost in Highbury?

For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in Highbury. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Highbury as well?

Yes. As well as Highbury itself, we cover the rest of Greater London and nearby towns such as Islington and Holloway. The process is the same wherever the kitchen is.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Nearby places we cover

Neighbouring towns where we offer hob and oven installation:

Other kitchen work in Highbury

Free survey visit

Book a free survey visit in Highbury

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price