Hob and oven installation in Westminster

Why hob and oven installation for a Westminster home?

Landlords in Greater London replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.

A new kitchen layout in Westminster sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. Kitchens in every part of Westminster are covered, and the survey visit is free wherever you are in Greater London.

What we cover for hob and oven installation in Westminster

Here is what usually goes into hob and oven installation, adjusted to your Westminster kitchen after we have measured it:

Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Old hob or oven disconnected safely and taken away for recycling
Built-in single and double ovens fixed into housings with their ventilation gaps

What should you budget for hob and oven installation in Westminster?

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Westminster kitchen. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What should you budget for hob and oven installation in Westminster?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Westminster homes

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Regulations for kitchen work in Westminster

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Westminster homeowners

Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Greater London.
If you are replacing an old cooker with a separate hob and oven in your Westminster kitchen, ask for the gas supply position and condition to be checked first.
Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.

Questions about hob and oven installation in Westminster

How much does hob and oven installation cost in Westminster?

Guide prices in Westminster are about £160 to £390 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Westminster do you work in?

All of them. Our Greater London coverage takes in the whole of Westminster, including the SW1 and W2 postcode districts, as well as surrounding towns such as Pimlico. If you are unsure, send us your postcode.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation in neighbouring towns

We also carry out hob and oven installation in these towns near Westminster: