Kitchen Installers UK

Hob and oven installation · Greater London

Hob and oven installation in Camden Town

Hob and oven installation in Camden Town starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

Guide price£160 to £1,000
Postcodes includeNW1
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

When does hob and oven installation make sense in Camden Town?

A new kitchen layout in Camden Town sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

If the oven in your Camden Town kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. Homes right across Camden Town are covered, as are nearby places such as Holloway, Islington and the villages in between.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Old hob or oven disconnected safely and taken away for recycling

What should you budget for hob and oven installation in Camden Town?

As a starting point for Camden Town, these ranges include VAT at 20% and allow for typical labour costs in London. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What should you budget for hob and oven installation in Camden Town?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£200–£520
New gas pipe run to a new hob positionPipework, testing and making good£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

House types around Camden Town and what they mean for a kitchen

In and around Camden Town, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to hob and oven installation in Camden Town?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book hob and oven installation in Camden Town

  • If you are replacing an old cooker with a separate hob and oven in your Camden Town kitchen, ask for the gas supply position and condition to be checked first.
  • If your Camden Town home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • Before buying an induction hob for your Camden Town home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.

Questions about hob and oven installation in Camden Town

How much does hob and oven installation cost in Camden Town?

For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in Camden Town. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you cover all of Camden Town?

Yes. We work across Camden Town, including the NW1 postcode district, and nearby towns such as Holloway and Islington. Book a free survey visit and we will arrange a time that suits you.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation near Camden Town

Close to Camden Town? We cover these nearby towns too:

Planning more than one job in Camden Town?

Free survey visit

Book a free survey visit in Camden Town

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price