Kitchen Installers UK

Hob and oven installation · Hampshire

Hob and oven installation in Hythe, Hampshire

Hob and oven installation in Hythe, Hampshire starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

Guide price£140 to £920
Postcodes includeSO45
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

What prompts hob and oven installation in Hythe, Hampshire?

If your Hythe, Hampshire kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.

Families in Hythe, Hampshire adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. We cover all of Hythe, Hampshire, including the SO45 postcode district, and travel out to neighbouring towns across Hampshire.

What we cover for hob and oven installation in Hythe, Hampshire

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Old hob or oven disconnected safely and taken away for recycling
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Built-in single and double ovens fixed into housings with their ventilation gaps

Hob and oven installation prices in Hythe, Hampshire

As a starting point for Hythe, Hampshire, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Hob and oven installation prices in Hythe, Hampshire
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£170–£460
New gas pipe run to a new hob positionPipework, testing and making good£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Hythe, Hampshire

Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Do you need approval for hob and oven installation in Hythe, Hampshire?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Worth knowing before the fit

  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • Before buying an induction hob for your Hythe, Hampshire home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Hampshire.
  • A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.

Questions about hob and oven installation in Hythe, Hampshire

How much does hob and oven installation cost in Hythe, Hampshire?

For connecting a gas hob to an existing supply, budget around £140 to £340 including VAT in Hythe, Hampshire. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Which parts of Hythe, Hampshire do you work in?

All of them. Our Hampshire coverage takes in the whole of Hythe, Hampshire, including the SO45 postcode district, as well as surrounding towns such as Southampton. If you are unsure, send us your postcode.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Hob and oven installation in neighbouring towns

Neighbouring towns where we offer hob and oven installation:

More services for Hythe, Hampshire kitchens

Free survey visit

Book a free survey visit in Hythe, Hampshire

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price