Cooker hood installation in Hythe, Hampshire

Why do people in Hythe, Hampshire choose cooker hood installation?

If condensation runs down the windows of your Hythe, Hampshire kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.

Cooks across Hampshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. If your home is in Hythe, Hampshire or close by in Southampton or Totton, the same survey, quote and fitting process applies.

What is in a typical job?

After the survey visit we write the scope down. For cooker hood installation in Hythe, Hampshire it usually covers:

Power supply connected by an electrician and tested to BS 7671
Short, straight runs of rigid ducting wherever the route allows
Recirculating hoods fitted with carbon filters, and their limits explained
Island and ceiling hoods fixed into the ceiling structure by two people
Survey of the hob position, duct route, outside wall and any open-flued appliance
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

What does cooker hood installation cost in Hythe, Hampshire?

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Hythe, Hampshire kitchen. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What does cooker hood installation cost in Hythe, Hampshire?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Across Hampshire you will often find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, and each shapes the kitchen differently. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Hythe, Hampshire

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Practical advice for Hythe, Hampshire homeowners

If your Hythe, Hampshire home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Check whether your Hythe, Hampshire home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Hythe, Hampshire

How much does cooker hood installation cost in Hythe, Hampshire?

Cooker hood installation in Hythe, Hampshire typically costs £140 to £280 including VAT for a like-for-like cooker hood swap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Hythe, Hampshire?

Yes. We work across Hythe, Hampshire, including the SO45 postcode district, and nearby towns such as Southampton and Totton. Book a free survey visit and we will arrange a time that suits you.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Nearby places we cover

We also carry out cooker hood installation in these towns near Hythe, Hampshire: