Hob and oven installation · Hampshire
Hob and oven installation in Southampton
Hob and oven installation for Southampton homes: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely. Every job starts with a free survey visit and a written quote.
Thinking about hob and oven installation in Southampton?
If your Southampton kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.
Families in Southampton adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. If your home is in Southampton or close by in Hythe, Hampshire or Totton, the same survey, quote and fitting process applies.
What is included in the work?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Old hob or oven disconnected safely and taken away for recycling
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
How much does hob and oven installation cost in Southampton?
Typical hob and oven installation prices for homes in Southampton, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £140–£340 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £140–£290 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £170–£460 |
| New gas pipe run to a new hob positionPipework, testing and making good | £290–£920 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Southampton homes
In and around Southampton, homes range across Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.
Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.
Building regulations, electrics and gas in Southampton
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.
Before you book hob and oven installation in Southampton
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Hampshire.
- If your Southampton home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
Questions about hob and oven installation in Southampton
How much does hob and oven installation cost in Southampton?
Hob and oven installation in Southampton typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Can you measure up in Southampton before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Southampton. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Also covering nearby towns
We also carry out hob and oven installation in these towns near Southampton:
- Hob and oven installation in Hythe, Hampshire
- Hob and oven installation in Totton
- Hob and oven installation in Eastleigh
- Hob and oven installation in Romsey
- Hob and oven installation in Fareham
- Hob and oven installation in Lymington
- Hob and oven installation across Hampshire