Kitchen plumbing in Hythe, Hampshire

Is kitchen plumbing right for your Hythe, Hampshire kitchen?

Plenty of Hythe, Hampshire kitchens still have the sink where it was put decades ago, and moving it under the window or into an island is a common reason to call a plumber.

A radiator under the window or on the only long wall is a familiar problem in Hythe, Hampshire kitchens; moving it clears space for a full run of base units. Kitchens in every part of Hythe, Hampshire are covered, and the survey visit is free wherever you are in Hampshire.

What does the job involve?

After the survey visit we write the scope down. For kitchen plumbing in Hythe, Hampshire it usually covers:

Hot and cold supplies run to the new sink position
A survey of the stopcock, supply pipes, waste route and drain connection
Redundant pipes cut back to the live supply and capped, then a full leak check
Isolation valves on each tap and appliance feed for quick shut-off
Radiators moved or replaced so they clear the new units
Waste pipes laid to a steady fall, with an access point for clearing blockages

Kitchen plumbing prices in Hythe, Hampshire

The figures below are guide prices for Hythe, Hampshire, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Kitchen plumbing prices in Hythe, Hampshire
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£230–£580
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£460–£1,200
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£690–£1,700
Radiator moved or replacedDrain down, new pipework and refill	£290–£580

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

What kind of kitchens do we fit in Hythe, Hampshire?

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

What rules apply to kitchen plumbing in Hythe, Hampshire?

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book kitchen plumbing in Hythe, Hampshire

Plan a day or two without a working sink in your Hythe, Hampshire kitchen, and fill a few large bottles before the water goes off.
If your Hythe, Hampshire home is on a water meter, a slow drip shows up on the bill, so look under the sink a week after the fit.
Measure the cupboard under your sink before buying a boiling water tap for your Hythe, Hampshire kitchen, as the tank and pipework need clear space.
Ask for redundant pipes to be removed back to the live supply rather than left behind units, where they can hold stale water or leak.

Questions about kitchen plumbing in Hythe, Hampshire

How much does kitchen plumbing cost in Hythe, Hampshire?

Kitchen plumbing in Hythe, Hampshire typically costs £230 to £580 including VAT for connecting the sink, dishwasher and washing machine, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Hythe, Hampshire as well?

Yes. As well as Hythe, Hampshire itself, we cover the rest of Hampshire and nearby towns such as Southampton and Totton. The process is the same wherever the kitchen is.

Can a kitchen sink be moved to a different wall?

Yes, usually. The supplies are the easy part; the waste decides it, because it needs a steady fall all the way to the stack or drain. On a suspended timber floor the pipe can often run between the joists, while on solid concrete a channel may need to be cut and filled. Where a fall cannot be achieved, a pumped waste is sometimes considered.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

When does kitchen plumbing need building control?

Most kitchen plumbing does not. Replacing a sink, adding appliance connections and rerouting supply pipes inside the kitchen are routine. A new connection to an underground drain, or a change in how waste water is discharged, needs building control approval in England, Wales and Northern Ireland, or a building warrant in Scotland. Every fitting must also meet the water fittings rules for your nation.

Also covering nearby towns

Close to Hythe, Hampshire? We cover these nearby towns too: