Kitchen Installers UK

Hob and oven installation · Hampshire

Hob and oven installation in Lymington

Homeowners and landlords in Lymington can book us for hob and oven installation: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely.

Guide price£140 to £920
Postcodes includeSO41
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Who usually needs hob and oven installation in Lymington?

If your Lymington kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.

Landlords in Hampshire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files. If your home is in Lymington or close by in New Milton or Hythe, Hampshire, the same survey, quote and fitting process applies.

What we cover for hob and oven installation in Lymington

Your written quote lists everything included. For hob and oven installation, that normally means:

  • Gas supply moved to a new hob position, with pipework tested and made good
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested

Guide prices for hob and oven installation in Lymington

The figures below are guide prices for Lymington, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for hob and oven installation in Lymington
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£170–£460
New gas pipe run to a new hob positionPipework, testing and making good£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Lymington?

Across Hampshire you will often find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, and each shapes the kitchen differently. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Do you need approval for hob and oven installation in Lymington?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Tips before you start

  • Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Hampshire.
  • If you are replacing an old cooker with a separate hob and oven in your Lymington kitchen, ask for the gas supply position and condition to be checked first.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Lymington

How much does hob and oven installation cost in Lymington?

Hob and oven installation in Lymington typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Lymington?

Yes. We work across Lymington, including the SO41 postcode district, and nearby towns such as New Milton and Hythe, Hampshire. Book a free survey visit and we will arrange a time that suits you.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation in neighbouring towns

Close to Lymington? We cover these nearby towns too:

Planning more than one job in Lymington?

Free survey visit

Book a free survey visit in Lymington

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price