Hob and oven installation in Honiton

Thinking about hob and oven installation in Honiton?

A new kitchen layout in Honiton sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Many households in Honiton switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. We work throughout Honiton (EX14) and across the wider Devon area.

What does the job involve?

Here is what usually goes into hob and oven installation, adjusted to your Honiton kitchen after we have measured it:

Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Built-in single and double ovens fixed into housings with their ventilation gaps
Gas supply moved to a new hob position, with pipework tested and made good
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Old hob or oven disconnected safely and taken away for recycling
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer

What does hob and oven installation cost in Honiton?

As a starting point for Honiton, these ranges include VAT at 20% and allow for typical labour costs in the South West. For the South West, these ranges are close to the national figures.

What does hob and oven installation cost in Honiton?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Honiton homes

In and around Honiton, homes range across cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house. Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier.

What rules apply to hob and oven installation in Honiton?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Practical advice for Honiton homeowners

Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Devon.
Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Devon can be cut correctly by the fabricator.
Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Honiton

How much does hob and oven installation cost in Honiton?

Hob and oven installation in Honiton typically costs £120 to £310 including VAT for connecting a gas hob to an existing supply, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Honiton?

Yes. We work across Honiton, including the EX14 postcode district, and nearby towns such as Chard and Tiverton. Book a free survey visit and we will arrange a time that suits you.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Hob and oven installation near Honiton

Close to Honiton? We cover these nearby towns too: