Hob and oven installation in Taunton

Who usually needs hob and oven installation in Taunton?

If your Taunton kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.

Families in Taunton adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. Taunton sits about 41 miles south-west of Bath, and our Somerset coverage takes in everything in between.

What we cover for hob and oven installation in Taunton

After the survey visit we write the scope down. For hob and oven installation in Taunton it usually covers:

Gas supply moved to a new hob position, with pipework tested and made good
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Old hob or oven disconnected safely and taken away for recycling
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models

Guide prices for hob and oven installation in Taunton

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Costs in the South West sit close to the national guide.

Guide prices for hob and oven installation in Taunton
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Taunton?

Typical homes in this part of Somerset include Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Regulations for kitchen work in Taunton

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Before you book hob and oven installation in Taunton

Before buying an induction hob for your Taunton home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If your Taunton home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Taunton

How much does hob and oven installation cost in Taunton?

For connecting a gas hob to an existing supply, budget around £120 to £310 including VAT in Taunton. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Taunton do you work in?

All of them. Our Somerset coverage takes in the whole of Taunton, including the TA1 postcode district, as well as surrounding towns such as Bridgwater. If you are unsure, send us your postcode.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Hob and oven installation in neighbouring towns

We also carry out hob and oven installation in these towns near Taunton: