Hob and oven installation in Chard

What prompts hob and oven installation in Chard?

Keen cooks across Somerset often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.

If your Chard kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. Chard sits about 43 miles south-west of Bath, and our Somerset coverage takes in everything in between.

What does the job involve?

Your written quote lists everything included. For hob and oven installation, that normally means:

Old hob or oven disconnected safely and taken away for recycling
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Gas supply moved to a new hob position, with pipework tested and made good
Built-in single and double ovens fixed into housings with their ventilation gaps

Hob and oven installation prices in Chard

As a starting point for Chard, these ranges include VAT at 20% and allow for typical labour costs in the South West. Costs in the South West sit close to the national guide.

Hob and oven installation prices in Chard
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Chard?

In and around Chard, homes range across Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.

What rules apply to hob and oven installation in Chard?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Before you book hob and oven installation in Chard

Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
If you are replacing an old cooker with a separate hob and oven in your Chard kitchen, ask for the gas supply position and condition to be checked first.
Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Chard

How much does hob and oven installation cost in Chard?

For connecting a gas hob to an existing supply, budget around £120 to £310 including VAT in Chard. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you work near Chard as well?

Yes. As well as Chard itself, we cover the rest of Somerset and nearby towns such as Honiton and Taunton. The process is the same wherever the kitchen is.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Hob and oven installation near Chard

Close to Chard? We cover these nearby towns too: