Flat-pack kitchen fitting in Felling

Thinking about flat-pack kitchen fitting in Felling?

Landlords in Tyne and Wear sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged.

Flat-pack is a common choice in Felling when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets. We cover all of Felling, including the NE10 postcode district, and travel out to neighbouring towns across Tyne and Wear.

What does flat-pack kitchen fitting in Felling include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Carcasses assembled on site on a flat surface and checked for square
Panels, plinths, sink, tap and appliance connections to existing points
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Laminate worktops cut and jointed, with cut edges sealed around the sink
Back panels fitted fully into their grooves or fixed as the instructions require
Base units levelled on adjustable legs and fixed to the wall and to each other

Flat-pack kitchen fitting prices in Felling

Typical flat-pack kitchen fitting prices for homes in Felling, including VAT and adjusted for the North East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Flat-pack kitchen fitting prices in Felling
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,600–£2,700
Medium flat-pack kitchen, built and fittedAs above	£2,500–£3,800
Large flat-pack kitchen with tall units, built and fittedAs above	£3,600–£5,000

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Felling?

In and around Felling, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

Do you need approval for flat-pack kitchen fitting in Felling?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Planning ahead

Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
If your Felling home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.

Questions about flat-pack kitchen fitting in Felling

How much does flat-pack kitchen fitting cost in Felling?

For a small flat-pack kitchen, built and fitted, budget around £1,600 to £2,700 including VAT in Felling. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Felling?

Yes. We work across Felling, including the NE10 postcode district, and nearby towns such as Gateshead and Newcastle upon Tyne. Book a free survey visit and we will arrange a time that suits you.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Flat-pack kitchen fitting in neighbouring towns

Close to Felling? We cover these nearby towns too: