Kitchen design and planning in Felling

Thinking about kitchen design and planning in Felling?

If your Felling kitchen is a narrow galley in an older terrace, a measured plan shows whether one run, two runs or moving the door works better.

If you are thinking about an island for a Felling kitchen, a design check tells you early whether the room is wide enough for comfortable walkways. We cover all of Felling, including the NE10 postcode district, and travel out to neighbouring towns across Tyne and Wear.

What is included in the work?

After the survey visit we write the scope down. For kitchen design and planning in Felling it usually covers:

A final plan and specification to order from and fit to
Appliance positions, housings and ventilation gaps checked against real sizes
Positions of water, waste, gas, power and radiators recorded on the plan
Measured survey of walls, windows, doors, ceiling height and floor levels
Layout options such as galley, L-shaped, U-shaped, island or peninsula
Working zones planned for preparation, cooking, washing and storage

Kitchen design and planning prices in Felling

The figures below are guide prices for Felling, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Kitchen design and planning prices in Felling
Typical project	Guide price
Design for a kitchen we supplyMeasured survey, layout plan and specification are part of the supply-and-fit price	Included
Measured drawings and layout plan for a kitchen bought elsewhereMeasured drawing, layout and service positions for your fitter and supplier	£270–£810
Detailed design with 3D views and elevationsFor larger or open-plan kitchens	£540–£1,400

Design is included in the supply-and-fit price; for kitchens bought elsewhere, the guide prices cover the measured survey, layout drawing and service positions, with 3D views and elevations in the detailed option. The survey visit to quote is free; the fee covers the measured drawings and layout plan you can take to any supplier. Prices include VAT at 20%.

Fitting kitchens in older and newer Felling homes

Typical homes in this part of Tyne and Wear include tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling. Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter.

Regulations for kitchen work in Felling

Designing and fitting a kitchen needs no planning permission in England, but a good plan allows for the rules that follow. New circuits are notifiable under Part P, a cooker hood extracting outside should achieve about 30 litres per second under Approved Document F, and removing a load-bearing wall needs a structural engineer and building control approval. Listed buildings and flats may need consent before a new outside vent is cut.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Worth knowing before the fit

If you are extending or knocking through in Felling, finalise the kitchen plan before the builder fixes drainage and power points.
Before the survey, list what frustrates you about your current Felling kitchen; it is the quickest way to shape a better layout.
Ask for the plan for your Felling kitchen to show socket, switch and light positions as well as units, so the electrician can follow it.
Mark radiators, the boiler, stopcock and meters on the plan early, as moving them adds cost and changes what can go where.

Questions about kitchen design and planning in Felling

How much does kitchen design and planning cost in Felling?

For measured drawings and a layout plan for a kitchen bought elsewhere, budget around £270 to £810 including VAT in Felling. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Felling?

Yes. We work across Felling, including the NE10 postcode district, and nearby towns such as Gateshead and Newcastle upon Tyne. Book a free survey visit and we will arrange a time that suits you.

What are the standard sizes of kitchen units and worktops?

Base units are typically 600 mm deep, with worktops around 900 mm from the floor, though the plinth height can raise or lower this slightly. Unit widths come in standard steps, commonly from 150 mm up to 1,000 mm, and wall units are shallower, often around 300 to 350 mm deep. A plan built on real measurements uses filler panels to take up any leftover space.

How long does kitchen design take?

Usually one to three weeks from the survey to a final plan, depending on how many layout options you want to compare and how quickly choices about doors, worktops and appliances are made. A replacement in the same layout can be settled quickly, while an open-plan room with an island or moved services often takes a few rounds of changes.

What is the kitchen work triangle?

The work triangle is a planning idea that links the sink, hob and fridge, keeping each within a short, unobstructed walk of the others so cooking takes fewer steps. It is still a useful check, but many kitchens are now planned in zones for preparation, cooking, washing and storage, which suits larger and open-plan rooms where more than one person uses the space.

Kitchen design and planning near Felling

Neighbouring towns where we offer kitchen design and planning: