Kitchen electrics in Exeter

Is kitchen electrics right for your Exeter kitchen?

Many kitchens in Exeter were wired when a kettle and a toaster were the only things on the worktop, so a refit is the natural time to put sockets where they are really used.

When an Exeter kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling. Homes right across Exeter are covered, as are nearby places such as Exmouth, Tiverton and the villages in between.

What is included in the work?

After the survey visit we write the scope down. For kitchen electrics in Exeter it usually covers:

First-fix cables and back boxes run before plastering or boarding
A check of the consumer unit, existing circuits and earthing before the layout is fixed
Testing, the correct certificate, and notification of the work where it is required
Supplies for the cooker hood, under-cabinet lights and a boiling water tap
Accessible isolation switches for integrated appliances, reachable without pulling units out
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar

Kitchen electrics prices in Exeter

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Exeter kitchen. For the South West, these ranges are close to the national figures.

Kitchen electrics prices in Exeter
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£260–£520
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£520–£1,500
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£310–£720

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

What kind of kitchens do we fit in Exeter?

The housing mix across Devon includes cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows, so no two kitchen fits are quite alike. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.

Do you need approval for kitchen electrics in Exeter?

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Worth knowing before the fit

Find your consumer unit and take a photo of it before the survey of your Exeter home, so the electrician can see straight away whether it has spare ways.
If you let a property in Devon, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
Keep sockets and switches sensibly clear of the sink and hob, away from splashing water and heat, and agree the positions on the plan.

Questions about kitchen electrics in Exeter

How much do kitchen electrics cost in Exeter?

Kitchen electrics in Exeter typically cost £260 to £520 including VAT for extra sockets or spurs on existing circuits, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Exeter before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Exeter. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

What paperwork should I get for kitchen electrics?

You should get an Electrical Installation Certificate for any new circuit and a Minor Electrical Installation Works Certificate for additions to an existing circuit, such as extra sockets. In England and Wales, notifiable work is also registered with the council through a competent person scheme or building control, and a compliance certificate follows. Keep these papers safe, because buyers' solicitors and letting agents often ask for them.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

Kitchen electrics near Exeter

Close to Exeter? We cover these nearby towns too: