Hob and oven installation in Eltham

When does hob and oven installation make sense in Eltham?

A new kitchen layout in Eltham sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Keen cooks across Greater London often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models. Our Greater London coverage reaches every part of Eltham (SE9) and out towards Blackheath.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Induction and ceramic hobs wired to a suitable cooker circuit and tested
Built-in single and double ovens fixed into housings with their ventilation gaps
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Gas supply moved to a new hob position, with pipework tested and made good
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Old hob or oven disconnected safely and taken away for recycling

What does hob and oven installation cost in Eltham?

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Eltham kitchen. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What does hob and oven installation cost in Eltham?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

House types around Eltham and what they mean for a kitchen

In and around Eltham, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to hob and oven installation in Eltham?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Eltham homeowners

If your Eltham home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
If you are replacing an old cooker with a separate hob and oven in your Eltham kitchen, ask for the gas supply position and condition to be checked first.
Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Eltham

How much does hob and oven installation cost in Eltham?

Guide prices in Eltham are about £160 to £390 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Eltham?

Yes. We work across Eltham, including the SE9 postcode district, and nearby towns such as Blackheath and Chislehurst. Book a free survey visit and we will arrange a time that suits you.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Nearby places we cover

Neighbouring towns where we offer hob and oven installation: