Hob and oven installation · Greater London
Hob and oven installation in Catford
Hob and oven installation for Catford homes: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely. Every job starts with a free survey visit and a written quote.
Thinking about hob and oven installation in Catford?
Many households in Catford switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.
Keen cooks across Greater London often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models. If your home is in Catford or close by in Brockley or Blackheath, the same survey, quote and fitting process applies.
What does hob and oven installation in Catford include?
After the survey visit we write the scope down. For hob and oven installation in Catford it usually covers:
- Old hob or oven disconnected safely and taken away for recycling
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
How much does hob and oven installation cost in Catford?
Typical hob and oven installation prices for homes in Catford, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £160–£390 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £160–£320 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £200–£520 |
| New gas pipe run to a new hob positionPipework, testing and making good | £320–£1,000 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
House types around Catford and what they mean for a kitchen
The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.
What rules apply to hob and oven installation in Catford?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Before you book hob and oven installation in Catford
- If you are replacing an old cooker with a separate hob and oven in your Catford kitchen, ask for the gas supply position and condition to be checked first.
- Before buying an induction hob for your Catford home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- If your Catford home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
Questions about hob and oven installation in Catford
How much does hob and oven installation cost in Catford?
For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in Catford. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.
Which parts of Catford do you work in?
All of them. Our Greater London coverage takes in the whole of Catford, including the SE6 postcode district, as well as surrounding towns such as Brockley. If you are unsure, send us your postcode.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Hob and oven installation in neighbouring towns
The same service is available a short drive from Catford, including:
- Hob and oven installation in Brockley
- Hob and oven installation in Blackheath
- Hob and oven installation in New Cross
- Hob and oven installation in Greenwich
- Hob and oven installation in Beckenham
- Hob and oven installation in Peckham
- Hob and oven installation across Greater London