Hob and oven installation in Greenwich

When does hob and oven installation make sense in Greenwich?

If your Greenwich kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.

Many households in Greenwich switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. If your home is in Greenwich or close by in New Cross or Blackheath, the same survey, quote and fitting process applies.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Greenwich covers:

Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Built-in single and double ovens fixed into housings with their ventilation gaps
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Appliance models checked against worktop cut-outs, oven housings and existing supplies

What does hob and oven installation cost in Greenwich?

As a starting point for Greenwich, these ranges include VAT at 20% and allow for typical labour costs in London. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What does hob and oven installation cost in Greenwich?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

House types around Greenwich and what they mean for a kitchen

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Greenwich

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book hob and oven installation in Greenwich

If you are replacing an old cooker with a separate hob and oven in your Greenwich kitchen, ask for the gas supply position and condition to be checked first.
Before buying an induction hob for your Greenwich home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If you are moving the hob in your Greenwich kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Greenwich

How much does hob and oven installation cost in Greenwich?

Hob and oven installation in Greenwich typically costs £160 to £390 including VAT for connecting a gas hob to an existing supply, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Greenwich as well?

Yes. As well as Greenwich itself, we cover the rest of Greater London and nearby towns such as New Cross and Blackheath. The process is the same wherever the kitchen is.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Hob and oven installation in neighbouring towns

The same service is available a short drive from Greenwich, including: