Hob and oven installation in Welling

When does hob and oven installation make sense in Welling?

Many households in Welling switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

Landlords in Greater London replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files. We work throughout Welling (DA16) and across the wider Greater London area.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Welling covers:

Induction and ceramic hobs wired to a suitable cooker circuit and tested
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Gas supply moved to a new hob position, with pipework tested and made good
Old hob or oven disconnected safely and taken away for recycling
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Built-in single and double ovens fixed into housings with their ventilation gaps

What should you budget for hob and oven installation in Welling?

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What should you budget for hob and oven installation in Welling?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Welling

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Before buying an induction hob for your Welling home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If you are moving the hob in your Welling kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
If you are replacing an old cooker with a separate hob and oven in your Welling kitchen, ask for the gas supply position and condition to be checked first.
Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Welling

How much does hob and oven installation cost in Welling?

Hob and oven installation in Welling typically costs £160 to £390 including VAT for connecting a gas hob to an existing supply, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Welling before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Welling. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Hob and oven installation near Welling

Close to Welling? We cover these nearby towns too: