Kitchen installation in Chard

What prompts kitchen installation in Chard?

If you have bought a home in Chard with a small galley or a dated back kitchen, a new installation can make far better use of the same space.

If the kitchen in your Chard home is twenty years old, with tired doors and worn worktops, a full installation renews everything in one planned job. Our Somerset coverage reaches every part of Chard (TA20) and out towards Honiton.

What is included in the work?

After the survey visit we write the scope down. For kitchen installation in Chard it usually covers:

First-fix electrics and plumbing for the new layout
Base, wall and tall units fixed, levelled and secured to the wall
Worktops cut, jointed and sealed, or templated for stone
Sink, tap and integrated appliances fitted and connected
Removal and disposal of the old kitchen, with gas and electrics made safe
Gas hobs connected only by Gas Safe registered engineers

What does kitchen installation cost in Chard?

The figures below are guide prices for Chard, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Prices across the South West are broadly in line with UK averages.

What does kitchen installation cost in Chard?
Typical project	Guide price
Small kitchen, 5–10 units, fit onlyYour units fitted, laminate worktop, sink and appliance connections	£1,500–£2,600
Medium kitchen, 10–15 units, fit onlyAs above, for a typical family kitchen	£2,600–£3,600
Large kitchen, 15+ units or an island, fit onlyTall larders, island, more cut-outs and panels	£3,600–£4,600
Mid-range kitchen, supplied and fittedRigid units, quartz or solid wood worktops, integrated appliances, fitting and the usual trades	£18,500–£36,000

Fit-only guide ranges cover labour for units, laminate worktops and standard connections; stone worktops, new circuits, moved services, tiling, flooring and plastering are priced as separate lines. Prices include VAT at 20%.

Kitchens in homes around Chard

Typical homes in this part of Somerset include Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Regulations for kitchen work in Chard

Fitting a new kitchen does not need planning permission in England. Listed building consent may be needed if the building is listed, and a new vent through the outside wall of a flat may need planning permission and the freeholder's consent. Electrical work must meet BS 7671, and new circuits or a new consumer unit are notifiable under Part P, so they are certified through a competent person scheme or building control. New extraction should be designed to Approved Document F rates (about 30 litres per second for a hood ducted outside), a refit should not leave ventilation worse than before, and only Gas Safe registered engineers may connect a gas hob.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Worth knowing before the fit

If your house in Somerset is older, ask for the walls to be checked for level; out-of-true walls change how units and worktops are scribed.
Ask for appliance sizes and ventilation gaps to be checked against the housings before you buy appliances for a Chard kitchen.
Check that your Chard delivery can reach the kitchen: tall larder units and long worktops need clear access through doors and stairs.
Decide where the sink, hob and dishwasher go early, because moving them later means repeating plumbing, electrics and tiling.

Questions about kitchen installation in Chard

How much does kitchen installation cost in Chard?

Kitchen installation in Chard typically costs £1,500 to £2,600 including VAT for a small kitchen of 5 to 10 units, fit only, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Chard before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Chard. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

How long does it take to install a kitchen?

Most kitchens take three to twelve days on site to fit, depending on the number of units and whether services are moving. Allow one to three weeks overall once electrics, plumbing, tiling and flooring are included, plus one to two weeks between templating and fitting if you choose stone worktops.

Do I need building regulations approval for a new kitchen?

Usually only for parts of the job. Fitting units does not need approval, but new electrical circuits are notifiable in England and Wales, removing a load-bearing wall needs approval everywhere, and in Scotland structural work needs a building warrant. Gas work must always be done by a Gas Safe registered engineer.

Will you fit a kitchen I have bought myself?

Yes. We fit kitchens bought from any retailer, trade counter or online supplier, flat-pack or rigid. On the survey we check the plan, and before fitting we check the delivery against it. Missing or damaged parts are for the supplier to replace, and we tell you straight away so the fit can be re-planned.

Kitchen installation in neighbouring towns

Close to Chard? We cover these nearby towns too: