Utility room fitting in Camden Town

Is utility room fitting right for your Camden Town kitchen?

If the kitchen in your Greater London home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

When a new kitchen is being planned in Greater London, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself. Kitchens in every part of Camden Town are covered, and the survey visit is free wherever you are in Greater London.

What does the job involve?

Your written quote lists everything included. For utility room fitting, that normally means:

Stacking kit fitted where the washer and dryer sit one above the other
Utility sink and tap plumbed in, with new supplies and waste where none exist
Washing machine supply, waste and isolation valve, tested for leaks
Extract fan fitted to clear moisture from washing and drying
Base, wall and tall units fitted, levelled and fixed to the wall
Free survey visit to check water, waste, power and outside wall positions

What should you budget for utility room fitting in Camden Town?

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Camden Town kitchen. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for utility room fitting in Camden Town?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,600–£3,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,900–£9,100
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£520–£1,300

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

House types around Camden Town and what they mean for a kitchen

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for utility room fitting in Camden Town?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book utility room fitting in Camden Town

Before choosing a dryer for your Camden Town utility, check whether there is an outside wall close enough for a short, straight vent duct.
Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
If your Greater London home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Camden Town

How much does utility room fitting cost in Camden Town?

Utility room fitting in Camden Town typically costs £1,600 to £3,900 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Camden Town?

Yes. We work across Camden Town, including the NW1 postcode district, and nearby towns such as Holloway and Islington. Book a free survey visit and we will arrange a time that suits you.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Nearby places we cover

The same service is available a short drive from Camden Town, including: