Kitchen Installers UK

Hob and oven installation · Aberdeen and Aberdeenshire

Hob and oven installation in Aberdeen

From the survey to handover, hob and oven installation in Aberdeen is run by us as one job, with the fitters and trades booked in the right order.

Guide price£110 to £750
Postcodes includeAB10, AB11, AB12 and AB13
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Who usually needs hob and oven installation in Aberdeen?

Landlords in Aberdeen and Aberdeenshire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.

Keen cooks across Aberdeen and Aberdeenshire often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models. Our Aberdeen and Aberdeenshire coverage reaches every part of Aberdeen (AB10, AB11, AB12, AB13, AB15 and AB16) and out towards Stonehaven.

What does hob and oven installation in Aberdeen include?

Here is what usually goes into hob and oven installation, adjusted to your Aberdeen kitchen after we have measured it:

  • Old hob or oven disconnected safely and taken away for recycling
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested

What should you budget for hob and oven installation in Aberdeen?

Typical hob and oven installation prices for homes in Aberdeen, including VAT and adjusted for Scotland. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for hob and oven installation in Aberdeen?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£110–£240
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£140–£380
New gas pipe run to a new hob positionPipework, testing and making good£240–£750

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Aberdeen?

In and around Aberdeen, homes range across granite tenement flats, granite villas, post-war council-built houses and farm cottages. Granite tenement flats often have a small kitchen off the hall, while villas and bungalows across Aberdeenshire tend to have a separate kitchen beside the dining room.

Mains water across Aberdeen and Aberdeenshire is soft, so limescale is rarely a problem and taps, sinks and boiling water taps stay cleaner. Tenement flats without lifts mean carrying units up common stairs, and rural farm tracks can be narrow for delivery lorries.

Building regulations, electrics and gas in Aberdeen

In Scotland, gas hobs, cookers and pipework must be fitted and tested by a Gas Safe registered engineer. Replacing a hob or oven, or adding a cooker circuit in a house, does not normally need a building warrant, but the electrics must meet building standards 4.5 and 4.6 and BS 7671. Ask for an Electrical Installation Certificate for any new circuit.

Homes in the Cairngorms National Park, listed granite buildings and conservation areas may need consent for new external vents, and tenement owners may need neighbours' agreement.

Getting the most from your hob and oven installation

  • If you are moving the hob in your Aberdeen kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Aberdeen and Aberdeenshire can be cut correctly by the fabricator.
  • Before buying an induction hob for your Aberdeen home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.

Questions about hob and oven installation in Aberdeen

How much does hob and oven installation cost in Aberdeen?

Guide prices in Aberdeen are about £110 to £280 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Aberdeen before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Aberdeen. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Nearby places we cover

Close to Aberdeen? We cover these nearby towns too:

Combine hob and oven installation with other work

Free survey visit

Book a free survey visit in Aberdeen

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price