Kitchen electrics in Aberdeen

Is kitchen electrics right for your Aberdeen kitchen?

When an Aberdeen kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling.

If you are moving the hob to an island or swapping gas for induction in your Aberdeen home, the kitchen needs a new supply routed to the new cooking position. We cover all of Aberdeen, including the AB10, AB11, AB12, AB13, AB15 and AB16 postcode districts, and travel out to neighbouring towns across Aberdeen and Aberdeenshire.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Aberdeen covers:

Supplies for the cooker hood, under-cabinet lights and a boiling water tap
Testing, the correct certificate, and notification of the work where it is required
First-fix cables and back boxes run before plastering or boarding
A check of the consumer unit, existing circuits and earthing before the layout is fixed
Second fix of sockets, switches and appliance connections once tiling is done
A dedicated circuit for an oven, range cooker or induction hob where needed

Guide prices for kitchen electrics in Aberdeen

Typical kitchen electrics prices for homes in Aberdeen, including VAT and adjusted for Scotland. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for kitchen electrics in Aberdeen
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£240–£470
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£470–£1,400
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£280–£660

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

House types around Aberdeen and what they mean for a kitchen

The housing mix across Aberdeen and Aberdeenshire includes granite tenement flats, granite villas, post-war council-built houses and farm cottages, so no two kitchen fits are quite alike. Granite tenement flats often have a small kitchen off the hall, while villas and bungalows across Aberdeenshire tend to have a separate kitchen beside the dining room.

Tenement flats without lifts mean carrying units up common stairs, and rural farm tracks can be narrow for delivery lorries. Mains water across Aberdeen and Aberdeenshire is soft, so limescale is rarely a problem and taps, sinks and boiling water taps stay cleaner.

Building regulations, electrics and gas in Aberdeen

In Scotland, electrical work in a house does not normally need a building warrant, but it must meet building standards 4.5 and 4.6 and be designed, installed and tested to BS 7671. The notification arrangements used in England and Wales do not apply here. Ask for an Electrical Installation Certificate for a new circuit, or a Minor Electrical Installation Works Certificate for additions to an existing one, and keep it with your property papers. Every home in Scotland must have an interlinked heat alarm in the kitchen, so it is kept or refitted, and tested, as part of the job.

Homes in the Cairngorms National Park, listed granite buildings and conservation areas may need consent for new external vents, and tenement owners may need neighbours' agreement.

Planning ahead

Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
Ask for USB sockets or extra doubles near the breakfast bar at first fix; changing a faceplate later is easy, adding a new box is not.
If you live in a flat in Aberdeen, find out where your consumer unit and meter are, as some sit in communal cupboards that need the managing agent's access.
Decide on lighting, island power and any boiling water tap before plastering, as cables are far harder to add after tiling.

Questions about kitchen electrics in Aberdeen

How much do kitchen electrics cost in Aberdeen?

For extra sockets or spurs on existing circuits, budget around £240 to £470 including VAT in Aberdeen. That reflects typical costs in Scotland; we confirm the actual figure in writing once we have measured up.

Do you cover all of Aberdeen?

Yes. We work across Aberdeen, including the AB10, AB11, AB12, AB13, AB15 and AB16 postcode districts, and nearby towns such as Stonehaven and Inverurie. Book a free survey visit and we will arrange a time that suits you.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

Nearby places we cover

Neighbouring towns where we offer kitchen electrics: