Hob and oven installation · Scotland
Hob and oven installation in Aberdeen and Aberdeenshire
If you need hob and oven installation anywhere in Aberdeen and Aberdeenshire, we survey the kitchen, agree the scope with you and book every trade through to handover.
Who usually needs hob and oven installation in Aberdeen and Aberdeenshire?
If your Aberdeen and Aberdeenshire kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.
Keen cooks across Aberdeen and Aberdeenshire often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.
What does hob and oven installation in Aberdeen and Aberdeenshire include?
The exact scope is agreed after the survey, but a typical job in Aberdeen and Aberdeenshire covers:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in Aberdeen and Aberdeenshire?
The figures below are guide prices for Aberdeen and Aberdeenshire, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £110–£280 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £110–£240 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £140–£380 |
| New gas pipe run to a new hob positionPipework, testing and making good | £240–£750 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes across Aberdeen and Aberdeenshire
The housing mix across Aberdeen and Aberdeenshire includes granite tenement flats, granite villas, post-war council-built houses and farm cottages, so no two kitchen fits are quite alike. Granite tenement flats often have a small kitchen off the hall, while villas and bungalows across Aberdeenshire tend to have a separate kitchen beside the dining room.
Mains water across Aberdeen and Aberdeenshire is soft, so limescale is rarely a problem and taps, sinks and boiling water taps stay cleaner. Tenement flats without lifts mean carrying units up common stairs, and rural farm tracks can be narrow for delivery lorries.
In a granite tenement flat, the kitchen is often a small room off the hall, and opening it into the living room needs a building warrant if the wall is load-bearing, and can need one even if it is not, where the change affects the escape route or fire separation in a flat. Many rural bungalows are off the gas grid, so cooking is often electric.
Rules for hob and oven installation in Aberdeen and Aberdeenshire
In Scotland, gas hobs, cookers and pipework must be fitted and tested by a Gas Safe registered engineer. Replacing a hob or oven, or adding a cooker circuit in a house, does not normally need a building warrant, but the electrics must meet building standards 4.5 and 4.6 and BS 7671. Ask for an Electrical Installation Certificate for any new circuit.
Homes in the Cairngorms National Park, listed granite buildings and conservation areas may need consent for new external vents, and tenement owners may need neighbours' agreement.
Before you start
- Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
- Before buying an induction hob for your Aberdeen and Aberdeenshire home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
Questions about hob and oven installation in Aberdeen and Aberdeenshire
How much does hob and oven installation cost in Aberdeen and Aberdeenshire?
Guide prices in Aberdeen and Aberdeenshire are about £110 to £280 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Aberdeen and Aberdeenshire?
Yes. We carry out hob and oven installation across Aberdeen and Aberdeenshire, including Aberdeen, Peterhead, Inverurie and Fraserburgh. Every job starts with a free survey visit and an itemised written quote.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Hob and oven installation in towns across Aberdeen and Aberdeenshire
Choose a town for local guide prices and postcode coverage:
- Hob and oven installation in Aberdeen
- Hob and oven installation in Peterhead
- Hob and oven installation in Inverurie
- Hob and oven installation in Fraserburgh
- Hob and oven installation in Stonehaven