Utility room fitting in Aberdeen

Is utility room fitting right for your Aberdeen kitchen?

If the kitchen in your Aberdeen and Aberdeenshire home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

If your Aberdeen home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility. We cover all of Aberdeen, including the AB10, AB11, AB12, AB13, AB15 and AB16 postcode districts, and travel out to neighbouring towns across Aberdeen and Aberdeenshire.

What we cover for utility room fitting in Aberdeen

Here is what usually goes into utility room fitting, adjusted to your Aberdeen kitchen after we have measured it:

Washing machine supply, waste and isolation valve, tested for leaks
Base, wall and tall units fitted, levelled and fixed to the wall
Free survey visit to check water, waste, power and outside wall positions
Utility sink and tap plumbed in, with new supplies and waste where none exist
A vent to outside for a vented dryer, or a drain hose for condenser models
Extract fan fitted to clear moisture from washing and drying

Utility room fitting prices in Aberdeen

Use these ranges to plan your budget. They include VAT, reflect costs in Scotland, and are firmed up once we have seen your Aberdeen kitchen. Costs across Scotland tend to sit under UK averages, which these ranges reflect.

Utility room fitting prices in Aberdeen
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£2,800–£6,600
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£380–£940

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Aberdeen

You will find granite tenement flats, granite villas, post-war council-built houses and farm cottages throughout Aberdeen and Aberdeenshire. Granite tenement flats often have a small kitchen off the hall, while villas and bungalows across Aberdeenshire tend to have a separate kitchen beside the dining room.

Tenement flats without lifts mean carrying units up common stairs, and rural farm tracks can be narrow for delivery lorries. Mains water across Aberdeen and Aberdeenshire is soft, so limescale is rarely a problem and taps, sinks and boiling water taps stay cleaner.

Building regulations, electrics and gas in Aberdeen

In Scotland, fitting utility units, plumbing in appliances and adding an extractor fan do not normally need a building warrant, but the electrics must meet the building standards and BS 7671, so ask for an Electrical Installation Certificate. A new connection to an underground drain, for example from a utility in a garage, needs a warrant first. Where an open-flued boiler is in the room, a Gas Safe registered engineer should check its flue with a spillage test after a fan is fitted.

Homes in the Cairngorms National Park, listed granite buildings and conservation areas may need consent for new external vents, and tenement owners may need neighbours' agreement.

Practical advice for Aberdeen homeowners

Plan the sockets in your Aberdeen utility so each appliance can be switched off at an accessible switch without moving the machine.
Before choosing a dryer for your Aberdeen utility, check whether there is an outside wall close enough for a short, straight vent duct.
Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.

Questions about utility room fitting in Aberdeen

How much does utility room fitting cost in Aberdeen?

Utility room fitting in Aberdeen typically costs £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Aberdeen before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Aberdeen. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Also covering nearby towns

Close to Aberdeen? We cover these nearby towns too: