Sink and tap installation in Aberdeen

Is sink and tap installation right for your Aberdeen kitchen?

People in Aberdeen with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later.

Plenty of people in Aberdeen replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen. We work throughout Aberdeen (AB10, AB11, AB12, AB13, AB15 and AB16) and across the wider Aberdeen and Aberdeenshire area.

What is in a typical job?

Your written quote lists everything included. For sink and tap installation, that normally means:

Isolation valves on the hot and cold supplies, with flexible tap tails connected
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Inset sink cut-outs made on site in laminate and wood worktops
Sink moved to a new position with new supply and waste runs
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Every joint leak tested, with water flow and drainage checked before handover

What does sink and tap installation cost in Aberdeen?

These guide ranges include VAT at 20% and are adjusted for prices in Scotland. We confirm your price in writing after a free survey visit. Costs across Scotland tend to sit under UK averages, which these ranges reflect.

What does sink and tap installation cost in Aberdeen?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£190–£380
Boiling water tap installedTank under the sink, filter and power supply	£140–£330
Sink moved to a new positionNew supplies and waste run	£380–£940
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Local homes and their kitchens

You will find granite tenement flats, granite villas, post-war council-built houses and farm cottages throughout Aberdeen and Aberdeenshire. Granite tenement flats often have a small kitchen off the hall, while villas and bungalows across Aberdeenshire tend to have a separate kitchen beside the dining room.

Tenement flats without lifts mean carrying units up common stairs, and rural farm tracks can be narrow for delivery lorries. Mains water across Aberdeen and Aberdeenshire is soft, so limescale is rarely a problem and taps, sinks and boiling water taps stay cleaner.

What rules apply to sink and tap installation in Aberdeen?

In Scotland, replacing a sink and tap does not need a building warrant, but water fittings should meet Scottish Water's byelaws. Changing how waste water is discharged, such as a new connection to an underground drain, needs a warrant first. Power for a boiling water tap does not normally need a warrant, but it must meet the building standards and BS 7671, and you should receive a certificate.

Homes in the Cairngorms National Park, listed granite buildings and conservation areas may need consent for new external vents, and tenement owners may need neighbours' agreement.

Getting the most from your sink and tap installation

Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Before buying a boiling water tap for your Aberdeen home, check its minimum water pressure and how much space it needs in the sink cupboard.
Ask whether a boiling water tap for your kitchen in Aberdeen and Aberdeenshire needs a filter, how often it should be changed and where it will sit in the cupboard.
If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.

Questions about sink and tap installation in Aberdeen

How much does sink and tap installation cost in Aberdeen?

For plumbing in a new sink and tap, budget around £190 to £380 including VAT in Aberdeen. That reflects typical costs in Scotland; we confirm the actual figure in writing once we have measured up.

Do you work near Aberdeen as well?

Yes. As well as Aberdeen itself, we cover the rest of Aberdeen and Aberdeenshire and nearby towns such as Stonehaven and Inverurie. The process is the same wherever the kitchen is.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Also covering nearby towns

We also carry out sink and tap installation in these towns near Aberdeen: