Kitchen Installers UK

Hob and oven installation · Greater London

Hob and oven installation in Abbey Wood

We take on hob and oven installation in Abbey Wood and the surrounding SE2 postcodes, working to a written scope so you know exactly what is included before anyone starts.

Guide price£160 to £1,000
Postcodes includeSE2
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Is hob and oven installation right for your Abbey Wood kitchen?

Some people in Abbey Wood buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.

If the oven in your Abbey Wood kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. We work throughout Abbey Wood (SE2) and across the wider Greater London area.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Old hob or oven disconnected safely and taken away for recycling
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested

Guide prices for hob and oven installation in Abbey Wood

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Guide prices for hob and oven installation in Abbey Wood
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£200–£520
New gas pipe run to a new hob positionPipework, testing and making good£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

House types around Abbey Wood and what they mean for a kitchen

In and around Abbey Wood, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for hob and oven installation in Abbey Wood?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book hob and oven installation in Abbey Wood

  • If your Abbey Wood home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • Before buying an induction hob for your Abbey Wood home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
  • If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Abbey Wood

How much does hob and oven installation cost in Abbey Wood?

Guide prices in Abbey Wood are about £160 to £390 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Abbey Wood do you work in?

All of them. Our Greater London coverage takes in the whole of Abbey Wood, including the SE2 postcode district, as well as surrounding towns such as Plumstead. If you are unsure, send us your postcode.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Nearby places we cover

Close to Abbey Wood? We cover these nearby towns too:

Combine hob and oven installation with other work

Free survey visit

Book a free survey visit in Abbey Wood

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price