Hob and oven installation · Greater London
Hob and oven installation in Thamesmead
Hob and oven installation in Thamesmead starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

Thinking about hob and oven installation in Thamesmead?
If your Thamesmead kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.
If the oven in your Thamesmead kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. We work throughout Thamesmead (SE2 and SE28) and across the wider Greater London area.
What is included in the work?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Old hob or oven disconnected safely and taken away for recycling
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Hob and oven installation prices in Thamesmead
Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Thamesmead kitchen. Prices in London usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £160–£390 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £160–£320 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £200–£520 |
| New gas pipe run to a new hob positionPipework, testing and making good | £320–£1,000 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Thamesmead homes
Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.
Building regulations, electrics and gas in Thamesmead
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Planning ahead
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater London can be cut correctly by the fabricator.
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
Questions about hob and oven installation in Thamesmead
How much does hob and oven installation cost in Thamesmead?
Hob and oven installation in Thamesmead typically costs £160 to £390 including VAT for connecting a gas hob to an existing supply, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you work near Thamesmead as well?
Yes. As well as Thamesmead itself, we cover the rest of Greater London and nearby towns such as Abbey Wood and Plumstead. The process is the same wherever the kitchen is.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Hob and oven installation in neighbouring towns
Close to Thamesmead? We cover these nearby towns too:
- Hob and oven installation in Abbey Wood
- Hob and oven installation in Plumstead
- Hob and oven installation in Barking
- Hob and oven installation in Welling
- Hob and oven installation in Dagenham
- Hob and oven installation in Ilford
- Hob and oven installation across Greater London
