Cooker hood installation in Abbey Wood

Who usually needs cooker hood installation in Abbey Wood?

If condensation runs down the windows of your Abbey Wood kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.

Some Abbey Wood households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob. If your home is in Abbey Wood or close by in Plumstead or Thamesmead, the same survey, quote and fitting process applies.

What does the job involve?

Your written quote lists everything included. For cooker hood installation, that normally means:

Short, straight runs of rigid ducting wherever the route allows
Recirculating hoods fitted with carbon filters, and their limits explained
Island and ceiling hoods fixed into the ceiling structure by two people
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Hood fixed at the height set by the hood and hob manufacturers
Power supply connected by an electrician and tested to BS 7671

What should you budget for cooker hood installation in Abbey Wood?

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Abbey Wood kitchen. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for cooker hood installation in Abbey Wood?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£160–£310
New ducted hood through an outside wallCore drilling, ducting run and external grille	£390–£1,200
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£390–£820
Recirculating hood fittedNo ducting; carbon filters need replacing	£160–£390

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Abbey Wood?

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Regulations for kitchen work in Abbey Wood

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
For an island hood in your Abbey Wood kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Before choosing a hood for your Abbey Wood kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.

Questions about cooker hood installation in Abbey Wood

How much does cooker hood installation cost in Abbey Wood?

For a like-for-like cooker hood swap, budget around £160 to £310 including VAT in Abbey Wood. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Which parts of Abbey Wood do you work in?

All of them. Our Greater London coverage takes in the whole of Abbey Wood, including the SE2 postcode district, as well as surrounding towns such as Plumstead. If you are unsure, send us your postcode.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation near Abbey Wood

We also carry out cooker hood installation in these towns near Abbey Wood: