Flat-pack kitchen fitting in Peckham

When does flat-pack kitchen fitting make sense in Peckham?

If your kitchen is in a Peckham flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.

Some people in Greater London start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part. Our Greater London coverage reaches every part of Peckham (SE15) and out towards New Cross.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Carcasses assembled on site on a flat surface and checked for square
Laminate worktops cut and jointed, with cut edges sealed around the sink
Free survey visit to check the plan, the boxes and the room
Panels, plinths, sink, tap and appliance connections to existing points
Back panels fitted fully into their grooves or fixed as the instructions require
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up

What does flat-pack kitchen fitting cost in Peckham?

Typical flat-pack kitchen fitting prices for homes in Peckham, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What does flat-pack kitchen fitting cost in Peckham?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around Peckham and what they mean for a kitchen

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Peckham

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Peckham homeowners

Count the boxes against the delivery note when your flat-pack kitchen arrives in Peckham; orders can run to dozens of boxes and one short box can stall a fit.
If the flat-pack sink base in your Peckham kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Set aside a room next to the kitchen in your Peckham home for assembly, with enough floor space to lay a tall larder carcass down flat.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Peckham

How much does flat-pack kitchen fitting cost in Peckham?

For a small flat-pack kitchen, built and fitted, budget around £2,300 to £3,900 including VAT in Peckham. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Peckham as well?

Yes. As well as Peckham itself, we cover the rest of Greater London and nearby towns such as New Cross and Brockley. The process is the same wherever the kitchen is.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Flat-pack kitchen fitting near Peckham

We also carry out flat-pack kitchen fitting in these towns near Peckham: