Flat-pack kitchen fitting in Catford

When does flat-pack kitchen fitting make sense in Catford?

If you have bought a flat-pack kitchen for your Catford home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

If your kitchen is in a Catford flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself. Homes right across Catford are covered, as are nearby places such as Brockley, Blackheath and the villages in between.

What is in a typical job?

After the survey visit we write the scope down. For flat-pack kitchen fitting in Catford it usually covers:

Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Laminate worktops cut and jointed, with cut edges sealed around the sink
Back panels fitted fully into their grooves or fixed as the instructions require
Free survey visit to check the plan, the boxes and the room
Wall units hung on hanging rails or brackets fixed securely into the wall
Carcasses assembled on site on a flat surface and checked for square

What does flat-pack kitchen fitting cost in Catford?

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What does flat-pack kitchen fitting cost in Catford?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Catford homes

In and around Catford, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Catford

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book flat-pack kitchen fitting in Catford

Set aside a room next to the kitchen in your Catford home for assembly, with enough floor space to lay a tall larder carcass down flat.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.

Questions about flat-pack kitchen fitting in Catford

How much does flat-pack kitchen fitting cost in Catford?

Guide prices in Catford are about £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Catford do you work in?

All of them. Our Greater London coverage takes in the whole of Catford, including the SE6 postcode district, as well as surrounding towns such as Brockley. If you are unsure, send us your postcode.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Nearby places we cover

We also carry out flat-pack kitchen fitting in these towns near Catford: