Flat-pack kitchen fitting in Brixton

Thinking about flat-pack kitchen fitting in Brixton?

If your kitchen is in a Brixton flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.

A Brixton kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. We work throughout Brixton (SW2) and across the wider Greater London area.

What is in a typical job?

Your written quote lists everything included. For flat-pack kitchen fitting, that normally means:

Wall units hung on hanging rails or brackets fixed securely into the wall
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Free survey visit to check the plan, the boxes and the room
Base units levelled on adjustable legs and fixed to the wall and to each other
Laminate worktops cut and jointed, with cut edges sealed around the sink
Panels, plinths, sink, tap and appliance connections to existing points

What should you budget for flat-pack kitchen fitting in Brixton?

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What should you budget for flat-pack kitchen fitting in Brixton?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around Brixton and what they mean for a kitchen

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Brixton

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Allow extra time on site: a small flat-pack kitchen typically takes four to six days, against three to five for rigid units.

Questions about flat-pack kitchen fitting in Brixton

How much does flat-pack kitchen fitting cost in Brixton?

Flat-pack kitchen fitting in Brixton typically costs £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Brixton as well?

Yes. As well as Brixton itself, we cover the rest of Greater London and nearby towns such as Peckham and Pimlico. The process is the same wherever the kitchen is.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Flat-pack kitchen fitting in neighbouring towns

We also carry out flat-pack kitchen fitting in these towns near Brixton: