Flat-pack kitchen fitting in Marlborough

Why do people in Marlborough choose flat-pack kitchen fitting?

If your kitchen is in a Marlborough flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.

Flat-pack is a common choice in Marlborough when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets. We work throughout Marlborough (SN8) and across the wider Wiltshire area.

What we cover for flat-pack kitchen fitting in Marlborough

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Back panels fitted fully into their grooves or fixed as the instructions require
Base units levelled on adjustable legs and fixed to the wall and to each other
Panels, plinths, sink, tap and appliance connections to existing points
Wall units hung on hanging rails or brackets fixed securely into the wall
Free survey visit to check the plan, the boxes and the room
Laminate worktops cut and jointed, with cut edges sealed around the sink

Flat-pack kitchen fitting prices in Marlborough

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Marlborough kitchen. Costs in the South West sit close to the national guide.

Flat-pack kitchen fitting prices in Marlborough
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,900–£3,100
Medium flat-pack kitchen, built and fittedAs above	£2,900–£4,300
Large flat-pack kitchen with tall units, built and fittedAs above	£4,100–£5,700

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Marlborough homes

Across Wiltshire you will often find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates, and each shapes the kitchen differently. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance. Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help.

Building regulations, electrics and gas in Marlborough

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Tips before you start

Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.

Questions about flat-pack kitchen fitting in Marlborough

How much does flat-pack kitchen fitting cost in Marlborough?

For a small flat-pack kitchen, built and fitted, budget around £1,900 to £3,100 including VAT in Marlborough. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you work near Marlborough as well?

Yes. As well as Marlborough itself, we cover the rest of Wiltshire and nearby towns such as Swindon and Devizes. The process is the same wherever the kitchen is.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Flat-pack kitchen fitting near Marlborough

Neighbouring towns where we offer flat-pack kitchen fitting: