Flat-pack kitchen fitting in Wantage

Why do people in Wantage choose flat-pack kitchen fitting?

First-time buyers in Wantage often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating.

A Wantage kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. Our Oxfordshire coverage reaches every part of Wantage (OX12) and out towards Didcot.

What we cover for flat-pack kitchen fitting in Wantage

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Base units levelled on adjustable legs and fixed to the wall and to each other
Wall units hung on hanging rails or brackets fixed securely into the wall
Carcasses assembled on site on a flat surface and checked for square
Free survey visit to check the plan, the boxes and the room
Panels, plinths, sink, tap and appliance connections to existing points

What does flat-pack kitchen fitting cost in Wantage?

The figures below are guide prices for Wantage, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does flat-pack kitchen fitting cost in Wantage?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Wantage?

Across Oxfordshire you will often find cotswold stone cottages, Victorian terraces, 1930s semis and new-build estates, and each shapes the kitchen differently. Oxford's Victorian terraces often have a narrow galley in the back addition, while stone cottages in market towns and villages tend to have small, low-ceilinged kitchens.

City streets with permit parking and narrow village lanes can both slow deliveries, so parking and the carry route for worktops are checked at the survey. Water across Oxfordshire is hard, so limescale on taps, kettles and boiling water taps is common, and a filter is worth planning in.

What rules apply to flat-pack kitchen fitting in Wantage?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Oxford's many listed buildings and conservation areas, along with Cotswold stone villages, may need consent before a new vent is cut or historic features are removed.

Planning ahead

Count the boxes against the delivery note when your flat-pack kitchen arrives in Wantage; orders can run to dozens of boxes and one short box can stall a fit.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Wantage

How much does flat-pack kitchen fitting cost in Wantage?

Flat-pack kitchen fitting in Wantage typically costs £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Wantage as well?

Yes. As well as Wantage itself, we cover the rest of Oxfordshire and nearby towns such as Didcot and Faringdon. The process is the same wherever the kitchen is.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Flat-pack kitchen fitting in neighbouring towns

The same service is available a short drive from Wantage, including: