Flat-pack kitchen fitting in Devizes

Why flat-pack kitchen fitting for a Devizes home?

If you have bought a flat-pack kitchen for your Devizes home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

If you are fitting a utility room as well as a kitchen in Devizes, flat-pack units for both rooms can be built and fitted as part of the same job. We work throughout Devizes (SN10) and across the wider Wiltshire area.

What we cover for flat-pack kitchen fitting in Devizes

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Devizes kitchen after we have measured it:

Back panels fitted fully into their grooves or fixed as the instructions require
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Wall units hung on hanging rails or brackets fixed securely into the wall
Carcasses assembled on site on a flat surface and checked for square
Free survey visit to check the plan, the boxes and the room
Panels, plinths, sink, tap and appliance connections to existing points

Flat-pack kitchen fitting prices in Devizes

The figures below are guide prices for Devizes, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. For the South West, these ranges are close to the national figures.

Flat-pack kitchen fitting prices in Devizes
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,900–£3,100
Medium flat-pack kitchen, built and fittedAs above	£2,900–£4,300
Large flat-pack kitchen with tall units, built and fittedAs above	£4,100–£5,700

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Devizes homes

Across Wiltshire you will often find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates, and each shapes the kitchen differently. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help. Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance.

What rules apply to flat-pack kitchen fitting in Devizes?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Getting the most from your flat-pack kitchen fitting

If your Devizes home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Devizes

How much does flat-pack kitchen fitting cost in Devizes?

Guide prices in Devizes are about £1,900 to £3,100 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Devizes as well?

Yes. As well as Devizes itself, we cover the rest of Wiltshire and nearby towns such as Melksham and Chippenham. The process is the same wherever the kitchen is.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Also covering nearby towns

Neighbouring towns where we offer flat-pack kitchen fitting: