Flat-pack kitchen fitting · England
Flat-pack kitchen fitting in Wiltshire
Homeowners and landlords across Wiltshire can book us for flat-pack kitchen fitting: flat-pack kitchen units built square on site, then fitted, levelled and finished like rigid units.
Is flat-pack kitchen fitting right for your Wiltshire kitchen?
If you are fitting a utility room as well as a kitchen in Wiltshire, flat-pack units for both rooms can be built and fitted as part of the same job.
A Wiltshire kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed.
What does flat-pack kitchen fitting in Wiltshire include?
Here is what usually goes into flat-pack kitchen fitting, adjusted to your Wiltshire kitchen after we have measured it:
- Free survey visit to check the plan, the boxes and the room
- Carcasses assembled on site on a flat surface and checked for square
- Back panels fitted fully into their grooves or fixed as the instructions require
- Base units levelled on adjustable legs and fixed to the wall and to each other
- Wall units hung on hanging rails or brackets fixed securely into the wall
- Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
- Laminate worktops cut and jointed, with cut edges sealed around the sink
- Panels, plinths, sink, tap and appliance connections to existing points
How much does flat-pack kitchen fitting cost in Wiltshire?
These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be | £1,900–£3,100 |
| Medium flat-pack kitchen, built and fittedAs above | £2,900–£4,300 |
| Large flat-pack kitchen with tall units, built and fittedAs above | £4,100–£5,700 |
Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.
Kitchens in homes across Wiltshire
You will find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates throughout Wiltshire. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.
Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help. Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance.
Railway terraces often have a narrow galley that owners open into the dining room to make a family kitchen. In a thatched or stone cottage, uneven walls and floors usually mean careful scribing, and cooker extraction needs extra thought where a vent cannot easily go through a thick or listed wall.
Rules for flat-pack kitchen fitting in Wiltshire
Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.
Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.
Before you start
- Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.
- Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.
- Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.
- Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.
- If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
- If the flat-pack sink base in your Wiltshire kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Questions about flat-pack kitchen fitting in Wiltshire
How much does flat-pack kitchen fitting cost in Wiltshire?
For a small flat-pack kitchen, built and fitted, budget around £1,900 to £3,100 including VAT in Wiltshire. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Wiltshire?
Yes. We carry out flat-pack kitchen fitting across Wiltshire, including Swindon, Salisbury, Trowbridge and Chippenham. Every job starts with a free survey visit and an itemised written quote.
Are flat-pack wall units strong enough once they are hung?
Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.
Can you fit a flat-pack kitchen I have already started building?
Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.
How do you protect a flat-pack sink unit from water?
Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.
Flat-pack kitchen fitting in towns across Wiltshire
Choose a town for local guide prices and postcode coverage:
- Flat-pack kitchen fitting in Swindon
- Flat-pack kitchen fitting in Salisbury
- Flat-pack kitchen fitting in Trowbridge
- Flat-pack kitchen fitting in Chippenham
- Flat-pack kitchen fitting in Melksham
- Flat-pack kitchen fitting in Warminster
- Flat-pack kitchen fitting in Devizes
- Flat-pack kitchen fitting in Marlborough
- Flat-pack kitchen fitting in Malmesbury