Flat-pack kitchen fitting in Chelsea

Thinking about flat-pack kitchen fitting in Chelsea?

If you have bought a flat-pack kitchen for your Chelsea home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

If you are fitting a utility room as well as a kitchen in Chelsea, flat-pack units for both rooms can be built and fitted as part of the same job. We work throughout Chelsea (SW3 and SW10) and across the wider Greater London area.

What does flat-pack kitchen fitting in Chelsea include?

The exact scope is agreed after the survey, but a typical job in Chelsea covers:

Laminate worktops cut and jointed, with cut edges sealed around the sink
Back panels fitted fully into their grooves or fixed as the instructions require
Carcasses assembled on site on a flat surface and checked for square
Wall units hung on hanging rails or brackets fixed securely into the wall
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points

Guide prices for flat-pack kitchen fitting in Chelsea

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for flat-pack kitchen fitting in Chelsea
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Chelsea homes

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to flat-pack kitchen fitting in Chelsea?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

If your Chelsea home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Chelsea

How much does flat-pack kitchen fitting cost in Chelsea?

Guide prices in Chelsea are about £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Chelsea?

Yes. We work across Chelsea, including the SW3 and SW10 postcode districts, and nearby towns such as Battersea and Fulham. Book a free survey visit and we will arrange a time that suits you.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Flat-pack kitchen fitting in neighbouring towns

Close to Chelsea? We cover these nearby towns too: