Flat-pack kitchen fitting in Fulham

When does flat-pack kitchen fitting make sense in Fulham?

First-time buyers in Fulham often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating.

If you are fitting a utility room as well as a kitchen in Fulham, flat-pack units for both rooms can be built and fitted as part of the same job. Kitchens in every part of Fulham are covered, and the survey visit is free wherever you are in Greater London.

What does flat-pack kitchen fitting in Fulham include?

Your written quote lists everything included. For flat-pack kitchen fitting, that normally means:

Carcasses assembled on site on a flat surface and checked for square
Panels, plinths, sink, tap and appliance connections to existing points
Base units levelled on adjustable legs and fixed to the wall and to each other
Free survey visit to check the plan, the boxes and the room
Laminate worktops cut and jointed, with cut edges sealed around the sink
Back panels fitted fully into their grooves or fixed as the instructions require

What should you budget for flat-pack kitchen fitting in Fulham?

Typical flat-pack kitchen fitting prices for homes in Fulham, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What should you budget for flat-pack kitchen fitting in Fulham?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Fulham?

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Fulham

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

Count the boxes against the delivery note when your flat-pack kitchen arrives in Fulham; orders can run to dozens of boxes and one short box can stall a fit.
If the flat-pack sink base in your Fulham kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Fulham

How much does flat-pack kitchen fitting cost in Fulham?

Guide prices in Fulham are about £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Fulham before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Fulham. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Flat-pack kitchen fitting in neighbouring towns

Close to Fulham? We cover these nearby towns too: