Hob and oven installation in Chelsea

Is hob and oven installation right for your Chelsea kitchen?

Many households in Chelsea switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

If your Chelsea kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. Our Greater London coverage reaches every part of Chelsea (SW3 and SW10) and out towards Battersea.

What we cover for hob and oven installation in Chelsea

After the survey visit we write the scope down. For hob and oven installation in Chelsea it usually covers:

Old hob or oven disconnected safely and taken away for recycling
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Gas supply moved to a new hob position, with pipework tested and made good
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models

Guide prices for hob and oven installation in Chelsea

As a starting point for Chelsea, these ranges include VAT at 20% and allow for typical labour costs in London. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Guide prices for hob and oven installation in Chelsea
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Chelsea homes

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to hob and oven installation in Chelsea?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
If you are replacing an old cooker with a separate hob and oven in your Chelsea kitchen, ask for the gas supply position and condition to be checked first.
Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Greater London.
Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Chelsea

How much does hob and oven installation cost in Chelsea?

Hob and oven installation in Chelsea typically costs £160 to £390 including VAT for connecting a gas hob to an existing supply, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Chelsea do you work in?

All of them. Our Greater London coverage takes in the whole of Chelsea, including the SW3 and SW10 postcode districts, as well as surrounding towns such as Battersea. If you are unsure, send us your postcode.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Nearby places we cover

Close to Chelsea? We cover these nearby towns too: