Fit-only kitchen fitting in Chard

Thinking about fit-only kitchen fitting in Chard?

A Chard kitchen with sound walls and services already in the right place suits fit only well, because the job is mainly units, worktops and connections.

People in Somerset who have bought from a trade counter often want a fitter who will check the plan against the room before any boxes are opened. Kitchens in every part of Chard are covered, and the survey visit is free wherever you are in Somerset.

What does the job involve?

Your written quote lists everything included. For fit-only kitchen fitting, that normally means:

Laminate or wood worktops cut, jointed, sealed and fixed down
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Delivery checked against the plan and delivery note before fitting starts
Packaging and offcuts cleared, with removal of the old kitchen available as an extra

What does fit-only kitchen fitting cost in Chard?

Typical fit-only kitchen fitting prices for homes in Chard, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. For the South West, these ranges are close to the national figures.

What does fit-only kitchen fitting cost in Chard?
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,500–£2,600
Medium kitchen (10–15 units)As above	£2,600–£3,600
Large kitchen (15+ units, island or tall larders)As above	£3,600–£4,600
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£190–£290 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Kitchens in homes around Chard

You will find Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses throughout Somerset. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Building regulations, electrics and gas in Chard

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Tips before you start

Before your kitchen is delivered to your Chard home, clear a dry room to store the boxes flat, away from damp garages and outbuildings.
Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Chard kitchen.
Book the fit for a date after the full delivery has arrived in Somerset; a split delivery is a common reason for a fit stalling halfway.
Do not open or assemble anything before the survey; sealed boxes make it far easier to claim missing or damaged parts from the supplier.

Questions about fit-only kitchen fitting in Chard

How much does fit-only kitchen fitting cost in Chard?

For a small kitchen of 5 to 10 units, budget around £1,500 to £2,600 including VAT in Chard. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Chard do you work in?

All of them. Our Somerset coverage takes in the whole of Chard, including the TA20 postcode district, as well as surrounding towns such as Honiton. If you are unsure, send us your postcode.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Fit-only kitchen fitting near Chard

The same service is available a short drive from Chard, including: