Utility room fitting · Somerset
Utility room fitting in Chard
Looking for utility room fitting in Chard? We survey, quote and carry out utility room fitting for homes across Chard and the rest of Somerset, with one contract from the first measure to the final check.
When does utility room fitting make sense in Chard?
Dog owners and keen walkers around Chard often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.
Landlords letting larger family homes across Somerset sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. Kitchens in every part of Chard are covered, and the survey visit is free wherever you are in Somerset.
What is in a typical job?
Your written quote lists everything included. For utility room fitting, that normally means:
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Stacking kit fitted where the washer and dryer sit one above the other
- Worktop over the washing machine and dryer, supported clear of the appliances
- Washing machine supply, waste and isolation valve, tested for leaks
How much does utility room fitting cost in Chard?
Typical utility room fitting prices for homes in Chard, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,200–£3,100 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,100–£7,200 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £410–£1,000 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
House types around Chard and what they mean for a kitchen
Typical homes in this part of Somerset include Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.
Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.
Regulations for kitchen work in Chard
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.
Worth knowing before the fit
- Plan the sockets in your Chard utility so each appliance can be switched off at an accessible switch without moving the machine.
- If the utility will be in the garage of your Chard home, make sure the space stays above freezing in winter for the pipes and machines.
- If your Somerset home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
- Under-stairs spaces can take a washer and dryer, but check the headroom, the ventilation and room to pull machines out before committing.
Questions about utility room fitting in Chard
How much does utility room fitting cost in Chard?
For fitting three to six utility units and a worktop you have bought, budget around £1,200 to £3,100 including VAT in Chard. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.
Which parts of Chard do you work in?
All of them. Our Somerset coverage takes in the whole of Chard, including the TA20 postcode district, as well as surrounding towns such as Honiton. If you are unsure, send us your postcode.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Utility room fitting in neighbouring towns
We also carry out utility room fitting in these towns near Chard:
- Utility room fitting in Honiton
- Utility room fitting in Taunton
- Utility room fitting in Bridport
- Utility room fitting in Yeovil
- Utility room fitting in Bridgwater
- Utility room fitting in Sherborne
- Utility room fitting across Somerset