Fit-only kitchen fitting in Bridport

Who usually needs fit-only kitchen fitting in Bridport?

If your kitchen is ordered for delivery to your Bridport home and the retailer does not offer fitting, fit only covers the labour to put it in properly.

People in Dorset who have bought from a trade counter often want a fitter who will check the plan against the room before any boxes are opened. We cover all of Bridport, including the DT6 postcode district, and travel out to neighbouring towns across Dorset.

What is in a typical job?

Here is what usually goes into fit-only kitchen fitting, adjusted to your Bridport kitchen after we have measured it:

Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Laminate or wood worktops cut, jointed, sealed and fixed down
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Sink, tap and appliances connected to the existing water, waste and power points

Guide prices for fit-only kitchen fitting in Bridport

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Bridport kitchen. Costs in the South West sit close to the national guide.

Guide prices for fit-only kitchen fitting in Bridport
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,500–£2,600
Medium kitchen (10–15 units)As above	£2,600–£3,600
Large kitchen (15+ units, island or tall larders)As above	£3,600–£4,600
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£190–£290 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Kitchens in homes around Bridport

Across Dorset you will often find thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows, and each shapes the kitchen differently. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help. Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult.

Building regulations, electrics and gas in Bridport

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Practical advice for Bridport homeowners

Ask your supplier for the full order list as well as the plan, so the fitter can check part numbers and not just unit sizes.
If you buy a worktop for a Bridport kitchen yourself, check its length covers the longest run plus enough spare for joints and end trims.
Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.

Questions about fit-only kitchen fitting in Bridport

How much does fit-only kitchen fitting cost in Bridport?

For a small kitchen of 5 to 10 units, budget around £1,500 to £2,600 including VAT in Bridport. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you cover all of Bridport?

Yes. We work across Bridport, including the DT6 postcode district, and nearby towns such as Chard and Dorchester. Book a free survey visit and we will arrange a time that suits you.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Fit-only kitchen fitting in neighbouring towns

We also carry out fit-only kitchen fitting in these towns near Bridport: