Fit-only kitchen fitting in Brecon

What prompts fit-only kitchen fitting in Brecon?

Plenty of homeowners in Brecon buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked.

Some Brecon households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start. If your home is in Brecon or close by in Merthyr Tydfil or Ebbw Vale, the same survey, quote and fitting process applies.

What does fit-only kitchen fitting in Brecon include?

Here is what usually goes into fit-only kitchen fitting, adjusted to your Brecon kitchen after we have measured it:

Laminate or wood worktops cut, jointed, sealed and fixed down
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Delivery checked against the plan and delivery note before fitting starts
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Sink, tap and appliances connected to the existing water, waste and power points

Guide prices for fit-only kitchen fitting in Brecon

Use these ranges to plan your budget. They include VAT, reflect costs in Wales, and are firmed up once we have seen your Brecon kitchen. Labour rates in Wales are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for fit-only kitchen fitting in Brecon
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,300
Medium kitchen (10–15 units)As above	£2,300–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,100
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£170–£260 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Brecon homes

In and around Brecon, homes range across stone farmhouses, timber-framed cottages, Victorian terraces and post-war bungalows. Farmhouses and stone cottages often have a large older kitchen or a small lean-to, while Victorian terraces in Brecon and Llandrindod Wells tend to have a narrow back galley.

Powys mains water is generally soft, though many rural homes rely on private supplies, which may need testing and filtering before a boiling water tap is fitted. Long distances, single-track roads and farm tracks can limit delivery vehicles, so worktop lengths, delivery times and waste removal need planning well ahead.

Regulations for kitchen work in Brecon

In Wales a fit-only kitchen needs no planning permission, though a listed building may need listed building consent. The electrics are where Wales differs: extending an existing circuit within a kitchen is notifiable under Part P, as are new circuits, so even an extra socket for an appliance is certified through a competent person scheme or building control. Gas hobs are connected by Gas Safe registered engineers only, and extraction should meet Approved Document F.

Homes inside Bannau Brycheiniog National Park, listed buildings and conservation areas may need consent for a new external vent or changes to historic features.

Planning ahead

Before your kitchen is delivered to your Brecon home, clear a dry room to store the boxes flat, away from damp garages and outbuildings.
If you buy a worktop for a Brecon kitchen yourself, check its length covers the longest run plus enough spare for joints and end trims.
Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Brecon kitchen.
Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.

Questions about fit-only kitchen fitting in Brecon

How much does fit-only kitchen fitting cost in Brecon?

Guide prices in Brecon are about £1,400 to £2,300 including VAT for a small kitchen of 5 to 10 units. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Brecon?

Yes. We work across Brecon, including the LD3 postcode district, and nearby towns such as Merthyr Tydfil and Ebbw Vale. Book a free survey visit and we will arrange a time that suits you.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Fit-only kitchen fitting near Brecon

We also carry out fit-only kitchen fitting in these towns near Brecon: