Splashbacks and tiling in Brecon

Is splashbacks and tiling right for your Brecon kitchen?

Some households in Powys want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down.

If your Brecon home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from. Kitchens in every part of Brecon are covered, and the survey visit is free wherever you are in Powys.

What we cover for splashbacks and tiling in Brecon

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Full-height or feature tiling behind the hob, sink or open shelving
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Free survey visit to check the walls, agree the layout and give an itemised quote
Socket and switch plates refitted by an electrician once the tiling is finished
Old tiles removed and walls prepared, patched or boarded where needed

What do splashbacks and tiling cost in Brecon?

The figures below are guide prices for Brecon, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Costs across Wales tend to sit under UK averages, which these ranges reflect.

What do splashbacks and tiling cost in Brecon?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£370
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£740
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£230–£550
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

You will find stone farmhouses, timber-framed cottages, Victorian terraces and post-war bungalows throughout Powys. Farmhouses and stone cottages often have a large older kitchen or a small lean-to, while Victorian terraces in Brecon and Llandrindod Wells tend to have a narrow back galley.

Powys mains water is generally soft, though many rural homes rely on private supplies, which may need testing and filtering before a boiling water tap is fitted. Long distances, single-track roads and farm tracks can limit delivery vehicles, so worktop lengths, delivery times and waste removal need planning well ahead.

Building regulations, electrics and gas in Brecon

In Wales, splashbacks and tiling need no planning permission or building regulations approval. Electrical changes are different: because Part P in Wales treats extending an existing circuit within a kitchen as notifiable, moving or adding a socket to suit new tiling is normally notifiable work, certified through a competent person scheme or building control. In a listed building, listed building consent may be needed before historic tiles or features are removed.

Homes inside Bannau Brycheiniog National Park, listed buildings and conservation areas may need consent for a new external vent or changes to historic features.

Getting the most from your splashbacks and tiling

If your Powys kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Brecon home, as cutting dust and adhesive travel further than you expect.
Ask to see where the tiling will start before the first row goes on in your Brecon kitchen, so narrow cut tiles end up in corners rather than on show.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Brecon

How much do splashbacks and tiling cost in Brecon?

Splashbacks and tiling in Brecon typically cost £140 to £370 including VAT for a tiled splashback, based on prices in Wales. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Brecon as well?

Yes. As well as Brecon itself, we cover the rest of Powys and nearby towns such as Merthyr Tydfil and Ebbw Vale. The process is the same wherever the kitchen is.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Also covering nearby towns

The same service is available a short drive from Brecon, including: