Fit-only kitchen fitting · Gwent
Fit-only kitchen fitting in Gelligaer
Whether your Gelligaer kitchen is a narrow galley or an open-plan room, fit-only kitchen fitting follows the same careful order: survey, written scope, fit and a final check together.

What prompts fit-only kitchen fitting in Gelligaer?
Some Gelligaer households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start.
If you have chosen stone worktops for a Gelligaer kitchen, fit only gets the base units level and fixed so they are ready when the fabricator arrives to template. Gelligaer sits about 12 miles north-west of Newport, Gwent, and our Gwent coverage takes in everything in between.
What does the job involve?
Here is what usually goes into fit-only kitchen fitting, adjusted to your Gelligaer kitchen after we have measured it:
- End panels, filler panels, plinths, cornice and light rail scribed and fitted
- Sink, tap and appliances connected to the existing water, waste and power points
- Free survey visit to check your plan, the room and the service positions
- Laminate or wood worktops cut, jointed, sealed and fixed down
- Delivery checked against the plan and delivery note before fitting starts
- Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Fit-only kitchen fitting prices in Gelligaer
Typical fit-only kitchen fitting prices for homes in Gelligaer, including VAT and adjusted for Wales. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought | £1,400–£2,300 |
| Medium kitchen (10–15 units)As above | £2,300–£3,200 |
| Large kitchen (15+ units, island or tall larders)As above | £3,200–£4,100 |
| Fitter day rateOne fitter; a two-person team is usually £300–£450 per day | £170–£260 per day |
Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.
House types around Gelligaer and what they mean for a kitchen
Typical homes in this part of Gwent include valley terraces, Victorian villas, post-war council-built houses and new-build estates. Valley terraces often have a small kitchen in the rear extension, while Victorian villas in Newport and post-war houses in Cwmbran tend to have a separate kitchen and dining room.
Steep valley streets, terraces with steps up to the door and limited parking can make carrying long worktops difficult, so access is checked at the survey. Water across most of Gwent is soft to moderately soft, which is kinder to taps, though some areas are harder, so check with your supplier.
Do you need approval for fit-only kitchen fitting in Gelligaer?
In Wales a fit-only kitchen needs no planning permission, though a listed building may need listed building consent. The electrics are where Wales differs: extending an existing circuit within a kitchen is notifiable under Part P, as are new circuits, so even an extra socket for an appliance is certified through a competent person scheme or building control. Gas hobs are connected by Gas Safe registered engineers only, and extraction should meet Approved Document F.
The northern edge of Gwent falls within Bannau Brycheiniog National Park, and listed buildings or conservation areas elsewhere may need consent for new external vents.
Practical advice for Gelligaer homeowners
- Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Gelligaer kitchen.
- Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
- Before your kitchen is delivered to your Gelligaer home, clear a dry room to store the boxes flat, away from damp garages and outbuildings.
- Worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste are easy to leave off an order.
Questions about fit-only kitchen fitting in Gelligaer
How much does fit-only kitchen fitting cost in Gelligaer?
Fit-only kitchen fitting in Gelligaer typically costs £1,400 to £2,300 including VAT for a small kitchen of 5 to 10 units, based on prices in Wales. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Can you measure up in Gelligaer before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Gelligaer. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Do I need to order anything extra for a fit-only job?
Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.
What happens if parts of my kitchen are missing or damaged?
Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.
What does fit-only kitchen fitting not include?
It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.
Fit-only kitchen fitting near Gelligaer
We also carry out fit-only kitchen fitting in these towns near Gelligaer:
- Fit-only kitchen fitting in Blackwood
- Fit-only kitchen fitting in Pontypridd
- Fit-only kitchen fitting in Caerphilly
- Fit-only kitchen fitting in Risca
- Fit-only kitchen fitting in Merthyr Tydfil
- Fit-only kitchen fitting in Ebbw Vale
- Fit-only kitchen fitting across Gwent
