Fit-only kitchen fitting in Rhondda

Who usually needs fit-only kitchen fitting in Rhondda?

If your kitchen is ordered for delivery to your Rhondda home and the retailer does not offer fitting, fit only covers the labour to put it in properly.

Plenty of homeowners in Rhondda buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked. Our Mid Glamorgan coverage reaches every part of Rhondda (CF42) and out towards Tonypandy.

What does the job involve?

Here is what usually goes into fit-only kitchen fitting, adjusted to your Rhondda kitchen after we have measured it:

Packaging and offcuts cleared, with removal of the old kitchen available as an extra
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Laminate or wood worktops cut, jointed, sealed and fixed down
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Sink, tap and appliances connected to the existing water, waste and power points

What should you budget for fit-only kitchen fitting in Rhondda?

As a starting point for Rhondda, these ranges include VAT at 20% and allow for typical labour costs in Wales. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for fit-only kitchen fitting in Rhondda?
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,300
Medium kitchen (10–15 units)As above	£2,300–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,100
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£170–£260 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Kitchens in homes around Rhondda

In and around Rhondda, homes range across valley terraces, post-war council-built houses, seaside bungalows and new-build estates. Valley terraces often have a narrow kitchen in a rear extension, while post-war houses in towns such as Bridgend tend to have a compact room beside the dining area.

Soft water is usual across Mid Glamorgan, so limescale is less of a concern and taps and boiling water taps tend to stay cleaner. Steep valley streets and terraces built into hillsides can mean steps, tight turns and limited parking, so carrying long worktops is planned at the survey.

Regulations for kitchen work in Rhondda

In Wales a fit-only kitchen needs no planning permission, though a listed building may need listed building consent. The electrics are where Wales differs: extending an existing circuit within a kitchen is notifiable under Part P, as are new circuits, so even an extra socket for an appliance is certified through a competent person scheme or building control. Gas hobs are connected by Gas Safe registered engineers only, and extraction should meet Approved Document F.

The northern fringe of the area falls within Bannau Brycheiniog National Park, and listed buildings or conservation areas may need consent for new external vents.

Worth knowing before the fit

Photograph each pallet and any damaged box as it arrives at your Rhondda address, and note the damage on the delivery note before the driver leaves.
Ask your supplier for the full order list as well as the plan, so the fitter can check part numbers and not just unit sizes.
Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Rhondda kitchen.
Do not open or assemble anything before the survey; sealed boxes make it far easier to claim missing or damaged parts from the supplier.

Questions about fit-only kitchen fitting in Rhondda

How much does fit-only kitchen fitting cost in Rhondda?

Guide prices in Rhondda are about £1,400 to £2,300 including VAT for a small kitchen of 5 to 10 units. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Rhondda before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Rhondda. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

Fit-only kitchen fitting in neighbouring towns

We also carry out fit-only kitchen fitting in these towns near Rhondda: