Cooker hood installation · England
Cooker hood installation in Nottinghamshire
Our cooker hood installation work covers the whole of Nottinghamshire, including Nottingham, Mansfield and Worksop.
Who usually needs cooker hood installation in Nottinghamshire?
If your Nottinghamshire kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.
If your Nottinghamshire house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.
What does cooker hood installation in Nottinghamshire include?
After the survey visit we write the scope down. For cooker hood installation in Nottinghamshire it usually covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Nottinghamshire?
These guide ranges include VAT at 20% and are adjusted for prices in the East Midlands. We confirm your price in writing after a free survey visit. For the East Midlands, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £290–£870 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £290–£610 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£290 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Nottinghamshire
The housing mix across Nottinghamshire includes Victorian terraces, 1930s semis, former mining village houses and new-build estates, so no two kitchen fits are quite alike. In Nottingham, Victorian terraces often have a narrow back kitchen, while 1930s semis and ex-council houses tend to have a compact rectangular kitchen at the rear.
Expect hard water across most of Nottinghamshire, so limescale on taps and boiling water taps is common, and an inline filter or softener can help. Inner-city terraces with permit parking and no rear access can make deliveries slow, and long worktops may have to come through a narrow hallway.
If your home is a former mining-village house, the kitchen is often small and enclosed, and opening it into a dining space is a common change that may involve moving a radiator or the boiler. Newer estate homes usually need a straight replacement with more storage, integrated appliances and improved lighting.
Rules for cooker hood installation in Nottinghamshire
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Where a home is listed or in a conservation area, such as parts of Nottingham and Newark, a new external vent or changes to historic features may need consent.
Before you start
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- If your Nottinghamshire home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Questions about cooker hood installation in Nottinghamshire
How much does cooker hood installation cost in Nottinghamshire?
Guide prices in Nottinghamshire are about £120 to £230 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Nottinghamshire?
Yes. We carry out cooker hood installation across Nottinghamshire, including Nottingham, Mansfield, Worksop and Newark-on-Trent. Every job starts with a free survey visit and an itemised written quote.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Cooker hood installation in towns across Nottinghamshire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Nottingham
- Cooker hood installation in Mansfield
- Cooker hood installation in Worksop
- Cooker hood installation in Newark-on-Trent
- Cooker hood installation in Arnold
- Cooker hood installation in West Bridgford
- Cooker hood installation in Sutton in Ashfield
- Cooker hood installation in Hucknall
- Cooker hood installation in Kirkby in Ashfield
- Cooker hood installation in Retford
- Cooker hood installation in Eastwood
- Cooker hood installation in Mansfield Woodhouse
- Cooker hood installation in Southwell