Cooker hood installation · England
Cooker hood installation in Shropshire
If you need cooker hood installation anywhere in Shropshire, we survey the kitchen, agree the scope with you and book every trade through to handover.
Is cooker hood installation right for your Shropshire kitchen?
People in flats across Shropshire sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.
Homeowners in Shropshire adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.
What does cooker hood installation in Shropshire include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Shropshire?
As a starting point for Shropshire, these ranges include VAT at 20% and allow for typical labour costs in the West Midlands. Costs in the West Midlands sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£240 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £300–£900 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £300–£630 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£300 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Shropshire
You will find timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses throughout Shropshire. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.
Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.
Telford's new-town houses often have small original kitchens, so owners may remove a partition to open them into the dining area. Rural farmhouses and cottages are frequently off the gas grid, so cooking may run on LPG, an oil-fired range or all-electric induction.
Rules for cooker hood installation in Shropshire
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.
Before you start
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- Before choosing a hood for your Shropshire kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
- Check whether your Shropshire home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Questions about cooker hood installation in Shropshire
How much does cooker hood installation cost in Shropshire?
For a like-for-like cooker hood swap, budget around £120 to £240 including VAT in Shropshire. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Shropshire?
Yes. We carry out cooker hood installation across Shropshire, including Telford, Shrewsbury, Wellington and Oswestry. Every job starts with a free survey visit and an itemised written quote.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Cooker hood installation in towns across Shropshire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Telford
- Cooker hood installation in Shrewsbury
- Cooker hood installation in Wellington
- Cooker hood installation in Oswestry
- Cooker hood installation in Bridgnorth
- Cooker hood installation in Market Drayton
- Cooker hood installation in Ludlow
- Cooker hood installation in Whitchurch, Shropshire