Cooker hood installation · England
Cooker hood installation in Worcestershire
Cooker hood installation in Worcestershire starts with a free visit to measure up, then a written scope and quote before any work begins.
Why do people in Worcestershire choose cooker hood installation?
If your Worcestershire house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.
If your Worcestershire kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.
What does cooker hood installation in Worcestershire include?
Your written quote lists everything included. For cooker hood installation, that normally means:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Worcestershire?
These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£240 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £300–£900 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £300–£630 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£300 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Worcestershire
Across Worcestershire you will often find timber-framed cottages, Victorian villas and terraces, new town houses and 1930s semis, and each shapes the kitchen differently. In Redditch, new-town houses often have a compact galley, while Victorian villas in Malvern and terraces in Worcester tend to have separate kitchens behind the dining room.
Much of Worcestershire has moderately hard to hard water, so limescale on taps and boiling water taps is common, and a filter can help. Hillside streets, village lanes and town-centre terraces with limited parking can all slow deliveries, so the route for worktops is checked at the survey.
Removing a partition to open a small new-town kitchen into the dining area is a common change in Redditch. Timber-framed cottages in the villages often have low beams, uneven floors and walls that are rarely square, which shape where tall units, worktops and extraction can go.
Rules for cooker hood installation in Worcestershire
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed timber-framed buildings and conservation areas, including parts of Worcester and Malvern, may need consent for new vents or alterations to historic features.
Before you start
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- If your Worcestershire home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- Check whether your Worcestershire home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Questions about cooker hood installation in Worcestershire
How much does cooker hood installation cost in Worcestershire?
Guide prices in Worcestershire are about £120 to £240 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Worcestershire?
Yes. We carry out cooker hood installation across Worcestershire, including Worcester, Redditch, Kidderminster and Great Malvern. Every job starts with a free survey visit and an itemised written quote.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Cooker hood installation in towns across Worcestershire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Worcester
- Cooker hood installation in Redditch
- Cooker hood installation in Kidderminster
- Cooker hood installation in Great Malvern
- Cooker hood installation in Bromsgrove
- Cooker hood installation in Evesham
- Cooker hood installation in Droitwich
- Cooker hood installation in Stourport-on-Severn
- Cooker hood installation in Pershore